U.S. Industrial 16" x 40" Precision Gear Head Engine Lathe USL1640CX-KIT

U.S. Industrial

$22,990.00
(No reviews yet) Write a Review
SKU:
USL1640CX-KIT
Adding to cart… The item has been added

Description

This precision, heavy duty geared head engine lathe incorporates hardened and precision ground bedways on longitudinal and cross ways, and wide, precision ground gears. It has a gap-bed design, feed-rod/lead screw safety interlock system, weight bearing tailstock and forward/reverse levers at both the aprons and the head stock.
As with all U.S. Industrial lathes, it comes with a plethora of standard accessories, 3 and 4-jaw chucks, follower and steady rests, work lamp, a coolant system and an operator/service manual.

Standard Equipment: (Items below are INCLUDED with the machine)

  • 10” 3-jaw chuck. Universal, self-centering
  • 12” 4-jaw independent chuck
  • Steady rest
  • 4-way toolpost
  • Micrometer carriage stop
  • Thread Dial
  • Work lamp
  • Flood coolant system
  • Sino 2-axis digital readout inch/metric (installed)
  • Inch/metric reading dials on Apron, Cross-Slide and Compound
  • 15” Face Plate & Dog Plate
  • Foot brake with microswitch and brake
  • Follow rest
  • Safety chuck shield
  • Taper attachment (installed)
  • Large spindle bore to pass 3”
  • Full length backsplash
  • Slide out chip pan
  • Manual with test certificate

Specifications

  • Swing Over Bed: 16.53” (420mm)
  • Swing Over Cross-Slide: 8.85” (225mm)
  • Swing Over Gap: 21.65” (550mm)
  • Gap Length: 10.23” (260mm)
  • Maximum Workpiece Length: 39.37” (1000mm)
  • Spindle Bore: 3.15” (80mm)
  • Spindle Type: D1-8 Camlock
  • 15 Spindle Speeds: 24 to 1600 RPM
  • 66 Longitudinal Feeds: .0027 to .15 IPR 
  • 66 Cross Feeds: .00135 to .075 IPR
  • 66 Metric Threads: 0.5 to 28mm
  • 66 Inch Threads: 1 to 56 TPI
  • 33 Module Threads: 0.5 to 3.5mm
  • 33 Diametral Pitch Threads: 8 to 56 DP
  • Compound Rest Travel: 5.119” (130mm)
  • Cross-Slide Travel: 12” (305mm)
  • Tailstock Taper: No. 5 Morse Taper
  • Tailstock Spindle Travel:  4.72” (120mm)
  • Main Motor HP: 10 HP (7.5 kw) 220V or 440V, 3-Phase
  • Coolant Pump Motor: Fractional HP
  • Lathe Gross Weight: 3,900 lbs
  • Dimensions: 100” long, 48” wide, 60” tall

Options

  • Quick Change Toolpost Kit with Holders
  • ISO Cutting Tool Package