BLOCSTOP® BS – SAFETY DEVICES ON STEEL WIRE ROPE
3229K blocstop® BS 15.301 - For 5/16 in. Wire Rope - 3/4 Ton / 1,500 lbs.
blocstop® BS
The hand-operated blocstop® BS is the perfect device to be used to hold or restrain any other loads during lifting and pulling applications. It is a fall-arrest secondary safety device which is fitted to the wire rope of griphoist® or tirak® hoist.
The blocstop® is used to hold or restrain any loads during lifting and pulling applications.
APPLICATIONS
- Mounted on a secondary wire rope, the blocstop® holds the load safely should there be any defect in the primary suspension wire rope or failure of the lifting device
- Mounted on the suspension or tensioned wire rope, the blocstop® protects the load against failure of the primary lifting/tensioning device
- Mounted on warehouse overhead doors, to securely hold the door open and will also prevent the door from closing too fast when overspeed conditions are detected
All Blocstop® safety devices are supplied with sling and anchor shackle (not shown)
