South Bend 13" x 30" Gearhead Lathe with Fagor DRO

South Bend

$19,995.00
(No reviews yet) Write a Review
SKU:
SB1049F
UPC:
690550753503
Adding to cart… The item has been added

SB1049F 13" x 30" Gearhead Lathe with Fagor DRO

A fully-loaded, high-precision lathe in a relatively small footprint.

The South Bend SB1049F Gearhead Lathe is driven by a fixed speed 3 HP motor with convenient headstock levers to control the 8 spindle speeds between 80–2000 RPM.

The spindles are D1-5 camlock with an MT#5 taper, 1.57" bore, and equipped with Japanese NSK or NTN bearings. The tailstocks have an MT#3 taper and 1.968" of quill travel.

A factory-installed Fagor two-axis digital readout displays the positioning of the carriage and cross slide.

The bed of the lathe is constructed with Meehanite® castings that are hardened and precision-ground in the traditional three V-way prismatic design.

Quality Allen-Bradley® electrical components and attention to detail provide dependable electrical control of the powered movements.

And finally, this milling machine comes with a circulating coolant system.

The SB1049F is covered by a South Bend 2-year warranty covering parts and factory defects. Tooling and other lathe-related consumables are not covered by this warranty.

The SB1049F manual was written by our U.S.-based Technical Documentation Department and is packed with useful information.

Parts may be available online and shipped from the South Bend parts warehouse in Springfield, MO.

SPECIFICATIONS:

  • Spindle motor: 3 HP, 220V, single-phase, 16.5
  • Coolant pump motor: 1/8 HP, 0.45A
  • Distance between centers: 30"
  • Swing over bed: 13.38"
  • Swing over cross slide: 8.26"
  • Swing over saddle: 11.02"
  • Maximum tool bit size: 3/4"
  • Compound travel: 4"
  • Carriage travel: 36-1/2"
  • Cross slide travel: 7"
  • Spindle bore: 1.57"
  • Spindle taper: MT #5
  • Spindle speeds: 80–2000 RPM
  • Spindle type: D1-5 camlock
  • Tailstock travel: 4-1/2"
  • Tailstock taper: MT #3
  • Tailstock barrel diameter: 1.968"
  • Longitudinal feeds: 0.002 to 0.067 IPR (17)
  • Cross feeds: 0.001 to 0.034 IPR (17)
  • Inch thread range: 2 to 72 TPI (45 pitches)
  • Metric thread range: 0.2 to 14 mm (39 pitches)
  • Modular threads: 0.3 to 3.5 (18 pitches)
  • Diametral threads: 8 to 44 (21 pitches)
  • Bed width: 9"
  • Overall dimensions: 71" W x 34" D x 73" H
  • Approximate shipping weight: 2090 lbs.

FEATURES:

  • Fagor 2-axis DRO
  • Meehanite® castings
  • Signature South Bend 3 V-way bed
  • Allen-Bradley® controls
  • Micrometer carriage stop
  • 4-Way tool post
  • Foot brake
  • 8" 4-jaw independent chuck D1-5
  • 7" 3-jaw scroll chuck D1-5
  • 10" faceplate D1-5
  • Follow rest
  • Steady rest with roller bearing tips
  • #5 to #3 morse taper spindle sleeves
  • Two morse taper #3 dead centers
  • U.S.-based customer service and technical support