The large 11-3/4" x 48" table on the ORS9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.
3HP motor with 9" x 138-3/4" abrasive belt handles large workpieces
Oscillates 24 cycles per minute for better finish and longer belt life
9-1/2" x 48" platen with graphite pad offers largest work surface in its class
Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
Pedestal control switch for easy access
Large 11-3/4" x 48" front worktable with 8" vertical travel tilts and 45° tilt, includes miter head for angle work
Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
Large radius end table has 6" vertical travel and 45° tilt for any angle and working height needed
Heavy-duty oscillating gearbox and shaft for long maintenance-free use
Hinged guard opens for infinite length sanding
Dual dust collection ports keep work area clean and extend abrasive belt life
Two 4" dust ports
Tilting main and end tables
Platen with graphite pad
Acme Tools Brand Name
POWERMATIC
Acme Tools Part Number
1791282
Amperage (A)
30
Assembled Weight (lbs)
800.0
Belt Sanding Speed-Maximum (Ft/Min)
3542
Belt Table Length (in)
48
Belt Table Width (in)
11.75
Bench or Stationary
Bench
California Proposition 65 Warning Required
Yes
Color / Finish
yellow
Cordless / Corded
Corded
Country of Origin
Taiwan
Dust Collection
Yes
ETL Listed
Pending
globalTradeItemNumber (GTIN)
00662755464126
Horsepower (hp)
3
Housing Material
metal
Internet Product Code (IPC)
40D272DA6D7
Manufacturer Warranty
5 year warranty
Net Tool Weight (lbs)
800.0
Operating Position
Horizontal or Vertical
Oscillation
Yes
Oscillations Per Minute
24
Package Contents
1 Edge Sander 2 Mounting Feet 4 Rubber Foot Pads 1 Control Switch Bracket 4 Hex Cap Screws, M10 x 30 4 Lock Nuts, M10 4 Flat Washers, M10 2 Hand Knobs 1 Owner's Manual 1 Warranty Card
Package Weight
870.0
Package Weight (lbs)
870
Sander Style
Belt
Sandpaper Type
Belt
Stand Included
Yes
Table Height (in)
40.75
Table Material
Cast Iron
Table Movement Range
Main Table Tilt (deg.) 5 in and 45 out
UL Listed
Yes
Variable Speed
Yes
