Constructed using the Meehanite® casting process. The new Electronic Variable Speed Milling Machines provide consistent and reliable operation and newly designed column and base incorporates a ridged, robust design.
Features:
- New! JET designed Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
- Swing away control box houses an e-stop and puts all controls at the operators fingertips
- The innovative design of the machine base provides an easier solution to level the machine without raising it up off the floor
- Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
- For added safety, the heavy-duty spindle break stops the spindle and interrupts the power, preventing accidental start-ups
- The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories
- CSA/CUS Certified
- Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
- Spindle head is internally cooled extending bearing, belt and motor life
- Table and ways are hardened up to 54 HRC and precision ground for greater accuracy
- The X and Y-Axis are coated with Turcite-B for reduced vibration and smooth movements
- Swing away safety shield
- LED work lamp
- Chip pan
- Dual locks on all moveable surfaces
- Way covers
- Drawbar
- Tool box with tools
Specifications:
- Digital Readout ACU-RITE VUE
- Number of Axis 3 (Quill)
- Powerfeed X and Y-Axis
- Power Draw Bar Pneumatic
- Table Size (L x W) (In.) 9 x 49
- Quill Diameter (In.) 3-3/8
- Number of Spindle Speeds Variable
- Range of Spindle Speeds (RPM) 60 - 4,500
- Quill Down Feed Rates (IPR) .0015 - .003 - .006
- Spindle Travel (In.) 5
- Head Movement (Deg.) 90° R & L, 45° F & B
- Max Distance Spindle to Table (In.) 20-3/4
- Distance Spindle to Column (Max.) (In.) 18-1/8
- Distance Spindle to Column (Min.) (In.) 4-3/4
- Collet Capacity 1/8 - 7/8
- Table Longitudinal Travel (In.) 36
- Table Longitudinal Travel With Powerfeed (In.) 30-3/4
- Table Cross Travel (In.) 12-5/8
- T-Slots Number and Size (In.) 3 and 5/8
- T-Slot Centers (In.) 2-1/2
- Work Table Weight Capacity (Lbs.) 720
- Travel of Knee (In.) 15-3/4
- Travel of Ram (In.) 15-1/4
- Saddle Width (In.) 11-1/2
- Column Width (In.) 18
- Inverter Type Delta, B
- Motor (HP) 3HP, 230V, 3Ph
- Overall Dimensions (L x W x H) (In.) 67 x 64 x 86
- Weight (Lbs.) 2,420
