Ironwood’s engineering team designed the S115K single head wide belt sander to be a robust blend of innovation, dependability, and quality. Designed for a serious woodworker who demands absolute precision in sanding, this machine will save labor and will offer versatility to perform a variety of sanding tasks. The S115K includes a combination head with a steel contact roller and adjustable platen. The head is driven by a poly-v-belt drive for smooth and vibration-free sanding results. Machine includes a programmable digital controller, enabling quick set-up times and maximum stability, precision, and sanding quality.
Simple and Intuitive Controls
- Controller quickly adjusts machine thickness (+/- 0.1mm or 0.004”)
- Controller storage capacity of 99 programs for easy and fast adjustment
- Displays in mm or decimal inches (3 decimal places for inches)
- Simple push button controls for turning on and off each head
- Control switch with key for service or operation mode
- Amp meters for each sanding head
- Hour meter display
- Emergency stop
Sanding Head
- 50” single head wide belt sander
- 140 mm diameter steel contact roller
- Height adjustable sanding pad
- Twenty (20) horsepower IE3 motor
- Poly-v belt drive
- Cutting speed of 20 mps (65 fps)
- Cutting direction against feed
Additional Technical Features
- Poly-v belt drive for sanding head for smooth and vibration-free sanding head operation
- Rubberized hold down rollers before and after sanding head with double hold down rollers at infeed and outfeed for consistent hold down
- Variable speed conveyor 4-16 mpm (13 – 52 fpm)
- Conveyor table mounted on four heavy duty jack screws for smooth, stable and accurate height adjustment
- Adjustment hand wheel for quick and easy fine height adjustments
- Automatic conveyor belt tracking for worry-free conveyor belt operation
- Electronic abrasive belt tracking
- Abrasive belt tensioning located on front of machine with safety switches for belt breakage
- Large diameter tensioning roller (100 mm)
- Abrasive belt loading assist
- Abrasive belt run-off protection
- Pneumatic disc motor braking system
- Workpiece over thickness protection system
- Safety switches on all access doors and emergency stops at infeed and outfeed locations
- Robust steel machine frame
- UL/CSA machine electrical components
Specifications
- Working width max.: 1270 mm (50”)
- Conveyor belt width: 1300 mm (51”)
- Abrasive belt width: 1320 mm (52”)
- Abrasive belt length: 1900 mm (75”)
- Workpiece thickness min.: 3 mm (1/8”)
- Workpiece thickness max.: 125mm (4.9”)
- Workpiece length min.: 400 mm (15.75”)*
- Variable conveyor speed: 4 – 16 MPM (13 - 52 FPM)
- Feed motor: 3 HP
- Table rise/fall motor: ½ HP
- Head #1: Combination head – 140mm Ø Steel contact roller with felt pad: 25 HP 65 fps belt speed
- Head #1: Rotation Direction: Against feed
- Electrical connection*: 230V | 3-Phase | 60 Hz.
- Dust collection requirements: 800 CFM
- Dust extraction: 2 ports | 123 mm (5”)
- Compressed air requirements: 90 PSI
- Air consumption per cycle: 4 CFM
- Machine net weight: 1,750 kg (3,858 lbs)
- Machine gross weight: 1,820 kg (4,012 lbs)
- Shipping dimensions (LxWxH): 84” x 68” x 86”
