G1033X 20" 5 HP Helical Cutterhead Planer

Made to handle your toughest everyday use.

We took our G1033Z 20" 5 HP Planer and made it better by including a helical cutterhead. The 4-row helical cutterhead produces ultra-smooth finishes and greatly reduces tearout in figured woods. The 92 indexable carbide insert cutters can each be rotated three times to expose new, sharp cutting edges.

The G1033X incorporates a safety magnetic switch for overload and power failure protection. The power controls are mounted on an attached pedestal for easy access.

The power is transferred from the 5 HP motor to the cutterhead by a triple v-belt design. This ensures maximum power connection between the cutterhead and the feed drive.

The solid cast-iron, extension tables make the total planer bed length just short of 5' long! They are precision-ground to a mirror-like finish for ultra-smooth lumber feeding.

The adjustable bed rollers keep the planer feeding smoothly. The feed rollers are driven by a two-speed gearbox at 16 FPM or 28 FPM.

Like all Grizzly planers, the G1033X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)

The G1033X manual was written by our U.S. based Technical Documentation Department and is packed with useful information.

The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO.

Made in an ISO 9001 factory

CSA certified

Note on replacement inserts:

• For models manufactured July 2007 and later, use H9893 (92) 15mm x 15mm x 2.5mm replacement inserts.*
• For models manufactured June 2007 and earlier, use H7319 (96) 14mm x 14mm x 2.0mm replacement inserts.*

SPECIFICATIONS:

• Motor: 5 HP, 220V, single-phase, 28A
• Maximum stock width: 20"
• Maximum stock thickness: 8"
• Minimum stock thickness: 1/4"
• Minimum stock length: 7"
• Maximum cutting depth full width: 5/64"
• Cutterhead diameter: 3-1/4"
• Cutterhead type: 4-row helical, 92 inserts
• Insert size & type: 15mm x 15mm x 2.5mm, 30° indexable carbide
• Cutterhead speed: 5000 RPM
• Feed rate: 16 & 28 FPM
• Table size with extensions: 20" x 56"
• Dust port size: 5"
• Footprint: 22" x 28"
• Overall dimensions: 39" W x 56" D x 41" H
• Approximate shipping weight: 909 lbs.

FEATURES:

• Heavy-duty, ball bearing board return rollers
• Pedestal-mounted control panel
• Adjustable bed rollers
• 4-column support with table locks
• Precision-ground, cast-iron table and extension wings
• Anti-kickback fingers