Another great addition to our line of spectacular Grizzly lathes is this 14" x 40" workhorse. Supplied with an 8-speed gearhead, it also comes with a 2 HP motor, D1-5 spindle with a generous 1-9/16" bore, a 200 series quick change tool post with 2 holders, flood coolant system, halogen work light, pull-out chip tray and foot break - great for safety! Plus, the tailstock has a socket for a torque wrench mounted on the front side and the outboard end of the spindle has a spider mount system - great for stabilizing long shafting and rifle barrels. This is a well stocked machine! Check out the standard equipment list below.
FEATURES
- Removable gap bed allows turnings up to 19-3/4" in diameter
- Easy to use lever controls
- Hardened and ground cast iron bed
- Cuts 4-112 Standard TPI and 0.1-7 Metric
- On/off reverse switch on carriage
- Halogen work light
- Outboard spindle has 4 brass tipped screws for supporting barrels
- Socket for tailstock lock
- Cast aluminum gear cover
- D1-5 spindle nose (6 pin)
- Foot brake
SPECIFICATIONS
- Swing over bed: 14"
- Swing over gap: 19-3/4"
- Swing over cross slide: 8-13/16"
- Distance between centers: 40"
- Bed width: 7-3/8"
- Spindle bore: 1.57" (40mm)
- Spindle nose taper: MT#5
- Spindle nose: D1-5 Camlock
- Cross slide travel: 6-11/16"
- Compound travel: 3-9/16"
- Tailstock barrel taper: MT#3
- Tailstock barrel travel: 3-15/16"
- Motor: 2 HP, 220V, single-phase, 10 Amps, 60 Hz, 1725 RPM
- Number of speeds: 8
- Range of speeds: 70-2000 RPM
- Cuts LH threads
- Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
- Approximate shipping weight: 1550 lbs.
STANDARD EQUIPMENT
- 6" 3-Jaw chuck with reversible jaws
- 8" 4-Jaw chuck with independent jaws
- 11" face plate
- Steady rest/follow rest
- Full length splash guard
- Quick change tool post with 2 tool holders
- 2 MT#3 dead centers (1 carbide tipped)
- 1 MT#3 live center
- 1 MT#5 - MT#3 sleeve
- Pull out chip pan
- 1/2" drill chuck w/ MT#3 arbor
- Toolbox
