- ISO 9001 certified
- Large spindle bore 4-1/8”
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 16”
- Heavy Duty main motor 15HP
- 16 spindle speeds from 25-1,600 rpm, 16 speeds
- 54 kinds of inch threads, and 54 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- One year industrial warranty for parts
Max. swing over bed 26"
Max. length of workpiece 160"
Max. swing over cross slide 17 1/4"
Max. Swing in gap 35 3/8"
Width of Bed 16"
Effective length in gap to spindle 9"
Effective length in gap to chuck jaws 4 1/2"
Spindle bore 4 1/8" D1-8
Taper of spindle center M.T. #5
Spindle speeds 25-1,600 rpm / 16 steps
Longitudinal feeds 0.0016-0.055 IPR, 25 kinds
Cross feeds 0.0008-0.027 IPR, 25 kinds
Inch threads 80-7/16 TPI, 54 kinds
Metric threads 0.45-120 mm , 54 kinds
Diametral Pitch threads 7/8-160 DP , 42 kinds
Module threads 0.25-60mm, 46 kinds
Max. travel of top slide 9"
Max. travel of cross slide 14 1/2"
Spindle length w/o chuck
Leadscrew length X TPI
20 1/2"
1 1/2" x 2 TPI
Diameter of tailstock quill 3 1/2"
Max. travel of tailstock quill
9 1/4"
Taper of tailstock quill center MT5
Main motor
Rapid traverse motor
15HP, 220V/40A or 440V/20A, 3 phase
1HP, 220V or 440V, 3 phase
Coolant pump 1/8 HP, 220V, or 440V, 3 phase
Net weight 10,850 lbs.
Overall dimensions, LxWxH 227" x 46" x 72"