If you need more capacity from your drill press, look at the DP-2012F-HD-V2 floor standing drill press to see if it will fit your needs. This mammoth has a 20” swing and a cast iron 16.5"x 18.5" oversized table and can handle just about anything that you can throw at it. The 3.6” diameter column and 24” x 16.5” cast iron base make for one rigid structure.
The DP-2012F-HD-V2 uses 110 volts to turn its MT4 spindle to 3200 rpms. The range of speeds is done through the use of six pulleys that give the DP-2012F 12 spindle speeds. It also includes a drill chuck that can opens to a maximum of ¾”.
SPECIFICATIONS
| Item Number | DP-2012F-HD-V2 |
|---|---|
| Spindle Speeds | 12 - 220 to 3200 rpm |
| Distance from Spindle to Table | 26" |
| Distance from Spindle to Base | 46.75" |
| Included Accesories | Included Accesories |
| Shipping Weight | 390lbs |
| Table Size (Length) | 16.5" |
| Table Size (Width) | 18.5" |
| Swing | 20" |
| Spindle | MT4 |
| Drill Capacity | 1.25" |
| RPM | 150-4200 |
| Spindle Travel | 4.75" |
| Drill Chuck Capacity | 1/32" - 5/8” (JT3 key) |
| T-Slot Size | 3 @ 5/8" |
| Power | 110V |
| Length | 35.4" |
| Width | 25.6" |
| Height | 66.7" |
| Horse Power | 2 hp |
| Weight (lbs) | 259 |
| Shipping Dimensions (Inches) | 69x44x23 |
* specifications subject to change without notice.
