Dake Hydraulic controlled feed 7" horizontal mitering bandsaw - 983110

Dake

$3,495.00
(No reviews yet) Write a Review
SKU:
D-983110
Adding to cart… The item has been added
Dake Hydraulic controlled feed 7" horizontal mitering bandsaw - 983110-1
 
Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Variable speed with rotary adjusting wheel and "Constant speed control” Maintains constant speed to prevent bog downs when cutting.
 
 
FEATURES:
 
  • Hydraulic controlled down feed with manual return
  • Automatic shut off at the end of the cut
  • Dual operating modes, manual cutting or head feed cutting
  • Powerful, manual clamping vise, with quick release lever for rapid vise opening and closing action for fast material size change over. The vise clamps material firmly.
  • Ergonomic designed for operator’s comfort and control
  • Motor gearbox combination bolted to the bow for less vibration
  • Variable speed with rotary adjusting wheel and "Constant speed control” Maintains constant speed to prevent bog downs when cutting
  • CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch
  • Blade tensioning is done via. "Go No Go” tensioning system with LED taking the guess work out of tensioning. Saw will not run if blade tension is not correct
  • Miters up to 60° right. Mitering pre-sets with slide stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
  • Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
  • Electric coolant pump and self-contained coolant system
  • 120 volt means you can use it most anywhere
  • Steel fabricated base, and stock stop gauge, one Bi-metal blade
 
 
STANDARD EQUIPMENT:
 
  • Steel base
  • Blade
  • Quick release vice
  • 120V Motor
 
 
SPECIFICATIONS:
 
  • Part Number: 983110-1
  • Capacity: 6.5" Round
  • Horsepower: 2.5
  • Voltage: 120 V
  • Maximum blade speed: Variable
  • Blade width: 3/4"
  • Blade length: 84 1/4"
  • Blade speeds: 114-262 FPM
  • Solid round 90° capacity: 6.5"
  • Solid round 45° right capacity: 4 1/4"
  • Solid round 60° right capacity: 3"
  • Solid square 90° capacity: 6 3/4"
  • Solid square 45° right capacity: 4 1/2"
  • Solid square 60° right capacity: 3"
  • Solid rectangle 90° capacity: 7 3/4 x 3"
  • Solid rectangle 45° right capacity: 6 x 4 1/4"
  • Solid rectangle 60° right capacity: 4 x 2 3/4"
  • Bed work (area): 
  • worktable Height: 37"
  • Height: 65"
  • Floor space: 35 x 48"
  • Floor space left to right: 35 x 48"
  • Floor space front to back: 35 x 48"
  • Floor to bed: