Drop Ship Cost: $250
Heavy duty, dual mitering saw that comes with one standard Bi-metal blade. Hydraulic controlled downfeed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60°right mitering capabilities. Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut.
Features:
Hydraulic controlled down feed with adjustable manual return
Automatic shut off at the end of the cut
Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut
Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly
Traversing vise can be used left or right of the blade
Ergonomic designed for operator’s comfort and control
Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with
CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
Blade tensioning is done via. A hand wheel and color-coded gauge tensioning system taking the guesswork out of tensioning
Miters up to 60° right / 45° left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
Electric coolant pump and self-contained coolant system
Steel fabricated base, and stock stop gauge
Standard:
Steel base
1 standard bi-metal blade
Traversing, manual vise
Coolant
Stock stop gauge
Specs:
MODEL NUMBERSE 10 DM
Part Number983112-2
Capacity10" Round
Horsepower2.75
Voltage220V 3 phase
Maximum blade speed230 FPM
Blade width1"
Blade length108"
Blade speed115-230 FPM
Solid round 90° capacity10"
Solid round 45° right capacity8"
Solid round 60° right capacity5"
Solid square 90° capacity7 1/2"
Solid square 45° right capacity7 1/2 / 6 3/4"
Solid square 60° right capacity5"
Solid rectangle 90° capacity10 1/2" x 7 3/4"
Solid rectangle 45° right capacity8 1/4" x 3 1/8"
Solid rectangle 60° right capacity4 3/4" x 5 1/4"
Bed work (area)
Worktable height37"
Height74"
Floor space28" x 66"
Floor space left to right28" x 66"
Floor space front to back28" x 66"
