Drop Ship Cost: $399
Semi-automatic cold saw that has a push-button or foot switch activation, an oversized pedestal base, shroud enclosed head feed cylinder, adjustable pneumatic vise. Variable speed controlled by a frequency inverter increases the material cutting range.
440V model requires step-down transformer for operation (part number: 300674) Sold Separately
Features:
Push button or foot-switch activation to avoid operator fatigue.
Shroud enclosed head feed cylinder with sliding cams for fast cutting stroke adjustment.
Additional ball bearing support of hardened and ground spindle shaft to prevent failure.
Adjustable pneumatic vise with sliding gib to true up clamping under blade with 1/4 stroke.
Oversized pedestal base to reduce vibration.
Head rotates 45º right and 60º left of center for easy miter cutting.
Removable hardened, serrated vise jaw faces.
Ability to add a programmable feed system to make fully automatic with wide range of capabilities.
Standard:
Blade
Coolant
Tools kit for changing blades
Instruction and service manual
Adjustable positive stop
WARNING: This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Specs:
MODEL NUMBER350SA
Part Number974355
Voltage220V
Horsepower3.5 max
Cutting AbilityFerrous/Non-Ferrous/Plastic
Maximum blade diameter14”
Maximum vise opening6-5/8"
Maximum feed vise openingn/a
Maximum Angle60° left/ 45° right
SlottingNo
Phase3
Speeds20-105 rpm
Weight890 lbs
Solid round 90° capacity3-3/8”
Solid round 45° capacity3”
Tube 90° capacity4-3/4"
Tube 45° capacity4”
Square 90° capacity4-1/8”
Square 45° capacity3-3/8”
Rectangle 90° capacity6-1/4” x 3-1/2”
Rectangle 45° capacity3-3/8” x 2-3/4”
Work height36-3/4”
Height60”
Width33”
Depth50”
