Dake 12-1/2 Manual cold saw 220v-3 ph - 974315-2
Manual cold saw with a head that will rotate 45º left and right for mitering. Heavy-duty low production saw, comes with one standard HSS blade. This model has 24V at controls, an e-stop, low voltage protection, and thermal overload protection. Available in 120V, 220V and 440V operation.
FEATURES:
- Head rotates 45º right and left of center for mitering.
- Dependable oversized spindle and gear assembly with steel spindle and bronze gear.
- Bronze gear with tapered roller bearing support.
- Reliable mechanical coolant pump with flow control adjustment.
- Additional ball bearing support of hardened and ground spindle shaft to prevent failure.
- 24V at controls, E-Stop, low voltage protection, and thermal overload protection.
- Vise is hand wheel adjustable and cam lever activated for repetitious clamping.
STANDARD EQUIPMENT:
- Blade
- Pedestal Base
- Tool Kit
- Gallon of Coolant
- Adjustable Positive Stop
SPECIFICATIONS:
- Part Number: 974315-2
- Voltage: 220V/440V 3 Phase; 120V 1 Phase
- Horsepower: 1.6 HP - 2.35 HP
- Cutting Ability: Ferrous/non-ferrous/plastics
- Maximum blade diameter: 12-1/2”
- Maximum vise opening: 4-5/8"
- Maximum feed vise opening: n/a
- Maximum Angle: 45° right/left
- Slotting: No
- Phase: 3 Phase/1 Phase
- Speeds: Three Phase: 22/44 rpm Single Phase: 44 rpm
- Weight: 450 lbs
- Solid round 90Ëš capacity: 2-5/8”
- Solid round 45Ëš capacity: 2-1/2”
- Tube 90Ëš capacity: 3-5/8”
- Tube 45Ëš capacity: 3-1/2”
- Square 90Ëš capacity: 3-1/4”
- Square 45Ëš capacity; 3-1/8”
- Rectangle 90Ëš capacity: 4-1/4” x 2-3/4”
- Rectangle 45Ëš capacity: 3-1/4” x 2-3/4”
- Work height: 38-1/2”
- Height: 59”
- Width: 26"
- Depth: 36”
