This gear-head metal lathe includes many features that competing models don’t, like a DRO and quick-change tool post. It’s a great value for small- to medium-sized shops.
- 8 spindle speeds, from 70 to 2,000 rpm.
- Runs on 220-volt single-phase power.
- Digital readout (DRO) comes hooked up and helps with repeatability.
- Quick-change tool post saves you the trouble of screwing and unscrewing tool sets.
- Precision-ground and hardened ways offer years of tight tolerances.
- Can cut both metric and standard threads.
- 3-jaw and 4-jaw chucks can hold square and rounded materials.
- Face plate lets you bolt large but not long pieces in place.
- Steady rest and follow rest brace the shaft and help prevent wobbling.
- Foot brake makes it easy to stop the machine in an emergency.
- Integrated coolant system extends the lathe’s lifetime of use.
- Halogen work light comes standard.
- Rigid castings ensure smooth chatter-free cuts and prolong tooling life.
- Covered by a 1-year parts warranty.
- Replacement parts are in stock at our Wisconsin headquarters for fast shipping.
- You can depend on lifetime technical support by phone from our team of reps with hands-on machine experience.
SPECIFICATIONS
| Item Number | PL-1340E-1.0 |
|---|---|
| Sleeve Travel | 4.5" |
| Spindle Bore | 1.50" |
| Spindle Bore Taper | Morse #5 |
| Sleeve Taper | Morse #3 |
| Sleeve Diameter | 1.65" |
| Range Of Inch Threads | 4 - 56 T.P.I. |
| Metric Thread Range | 0.4 – 7 mm |
| Spindle Nose | D1-4" |
| Travel Of Cross Slide | 6.29" |
| Travel Of Top Slide | 2.68" |
| Width Of Bed | 7.375" |
| Spindle Speed | 8 (70 – 2000 rpm) |
| Swing In Gap | 18.750" |
| Swing Over Bed | 13" |
| Swing Over Cross Slide | 7.750" |
| Longitudinal Feed Range | 0.002" – 0.0548"/rev |
| Lead Screw Thread Pitch | 8 T.P.I. |
| Length Of Gap | 5" |
| Max. Tool Selection | .625" x .625" |
| Cross Feed Range | 0.007" – 0.0187"/rev |
| Distance Between Centers | 3667 |
| Power | 220V Single Phase |
| Shipping Weight | 1515lbs |
| Shipping Dimensions (Inches) | 79x44x63 |
