Sometimes you just need a high quality metalwroking drill press in am area that doeesnt have easy access to 220V power. That's where the Baileigh DP-1375VS-110 comes in. Like all of our drill presses, the DP-1375VS-110 is built to last for years because it draws strength from its sturdy base and column that won’t flinch during the heaviest drilling sessions. With a 22” swing, this variable-speed drill press will prove an ideal investment for any machinist or fabricator.
- 2 hp motor runs on just 110 volt power.
- Tackles a maximum drilling capacity of 1.1/16” mild steel.
- Heavy duty spindle transfers power to the #3 Morse taper tooling .
- Speed potentiometer dial controls powerful inverter-driven head.
- Variable drilling speed, ranging from 120 to 2000 rpm, lets you choose the right setting to suit your application.
- Digital readout displays actual spindle rpm, ensuring precise results time after time.
- Features an auto-reversing tap function with up to 5/8” capacity.
- 4-1/2" Wide column provides extra support and rigidity to reduce flexing even during the toughest drilling sessions.
- Base and 22” x 18.5” table are made of a heavy iron casting to increase rigidity.
- Very large .625" T-slots let a vise or fixture securely hold your material.
- Coolant system, stored in the base, sprays out at the end of the spindle behind the splash and safety guard to extend drill bit and tap lifespan.
- Covered by a 1-year parts warranty and lifetime technical support by phone from Baileigh’s team of experienced reps.
- Need it soon? We typically keep the DP-1375VS-110 in stock for quick shipments.
SPECIFICATIONS
Item Number | DP-1375VS-110 |
---|---|
Spindle Speeds | Inverter Driven Varialble |
Max. Drill Capacity | 1 |
Swing | 20.8" |
Spindle Travel | 5.9" |
Base Size | 27" x 19" |
Table Size | 22" x 18.75" |
Coolant System | Yes |
Spindle Nose to Table | 33.5" |
Spindle Nose to Base | 46.875" |
Spindle Speed | 120 - 2000 rpm |
Spindle Taper | MT 3 |
Table Slot | .625" |
Tapping Capacity | 5/8" |
Table Load Capacity | 154 lbs |
Main Motor | 2 hp |
Motor Coolant | 1/8 hp |
Drill Capacity Cast Iron | 1-1/16" |
Drill Capacity Steel | 1-1/4" |
Power | 110 Volt |
Shipping Weight | 579lbs |
Drill Capacity | 1.25" |
Column Diameter | 4.52" |
Shipping Dimensions (Inches) | 60x44x79 |