This economical belt driven drill press runs smoothly even at full capacity - the DP-1000E is a 15-1/2" drill press with an MT2 Taper that lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life.
- .5 hp motor requires 110 volt power and will work at any shop or site.
- Belt driven head drills a maximum capacity of 1” steel.
- 5 speeds in the range from 250 to 2900 rpm to suit your application.
- 3-1/8" steel column eliminates flexing even when drilling at full capacity.
- Rigid cast iron base and table add strength to the drill’s structure.
- Includes a safety shield around the drill head to protect you.
- Baileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone from our experienced team.
SPECIFICATIONS
Item Number | DP-1000E |
---|---|
Swing | 15-1/2" |
Diameter of Column | 3-1/8" |
Spindle Travel | 3" |
Base Size | 23" x 16" |
T-Slot Width | 1/2" |
Table Size | 12-1/2" x 12-1/2" |
Speeds | 5 |
Quill Diameter | 2" |
Spindle Nose to Table | 5-1/2" Min. To 35-1/2" Max. |
Spindle Nose to Base | 47-1/2" |
Spindle Taper | MT2 |
Table Angle Adj | 360° |
Main Motor | 1/2 hp |
Rpm | 250, 700, 1150, 1900, & 2900 |
Drill Capacity Steel | 1" |
Power | 110 Volt |
Shipping Weight | 290lbs |
Special Notes | B-16 1-16mm Keyless Chuck, MT2 to B16 Arbor, Drift Key |
Certification | CE |
Shipping Dimensions (Inches) | 60x44x21 |