The BSV-24VS-V2 is the largest non-mitering vertical bandsaw in our line up, this metal cutting band saw increases capacity and adds variable-speed. Make straight and curved cuts with the vertical blade.
- 3 hp motor runs on 220-volt single phase power.
- Wide 23.6" throat depth.
- 12.2” maximum cutting thickness.
- Accepts standard 1/8” to 5/8” blades.
- Cast iron table can pivot left to right.
- Includes a cast iron mitering system, rip fence, and protractor to make sure your cuts are straight and repeatable.
- Inverter controlled variable speeds from 83 to 1650 fpm allows you to adjust the speed for cutting wood, metal, and even plastic.
- DRO lets you see the blade speed, so you can choose the right settings for your material and extend blade life.
- This band saw includes everything you need to cut out the center of the material without having to fix a cut through it.
- Manual shear lets you cut the blade, so you can run it through the workpiece, then weld it back together.
- Comes standard with a fully-integrated blade welder with a built-in grinder for finishing the weld joint—great for getting to the center of a cut or repairing blades.
- Thick steel plate framework minimizes vibrations to deliver accurate cuts and helps the machine last for many years.
- Air blowdown system cools the blade and keeps the saw clean from material chips and shavings.
- Halogen work light lets you see what you’re cutting more clearly.
- Covered by a 1-year parts warranty.
- Both the saw and its replacement parts are typically in stock for fast deliveries.
- Includes lifetime technical support by phone. You can call our team of experienced reps whenever you need help with this metal-cutting band saw.
Recommended for: Any shop that cuts a variety of materials, such as aluminum, plastic, mild steel, and chrome alloy.
SPECIFICATIONS
Item Number | BSV-24VS-V2 |
---|---|
Speed Control | Inverter |
Table Size | 24"x24"(cast) & 7.8"x24"(steel) |
Welder Capacity | .74" |
Slant of Table | 45°R & 15°L |
Motor | 3 hp |
Maximum Thickness | 12.2" |
Included Accesories | Blade welder, LED work light, Chip blower, Rip fence, Miter gauge |
Throat Depth | 23.6" |
Table Height | 36.4" |
Blade Length | 177.95”-179.13"(4520-4550mm) |
Blade Speed (fpm) | 83-1650 Variable Speed |
Blade Thickness | .032" |
Power | 220V / 1-phase |
Shipping Weight | 1025 lbs |
Included Blade Size | 0.118”(13mm) x 14T |
Shipping Dimensions (Inches) | 53.54”x33.46”x85.43” |
Machine Dimensions (L x W x H) | 49.6"x33"x86.22" |
* specifications subject to change without notice.